40
Changing the remote fax activation code
This code can be from 2 to 4 digits in length using the numbers 0 through 9 and the character
*
.
This code should not be set to “0000”.
Remote fax receiving
(using an extension phone to receive a fax message)
If you have an extension phone on the same line, it is possible to receive a manual fax message. Using the
extension phone, dial the remote fax activation code.
This saves you from going to the facsimile unit and pressing
(START/SET)
.
Important:
¡
To activate this feature, use a touch tone telephone as the extension phone and press
J J
(pre-selected
remote fax activation code) FIRMLY.
Receiving using an extension phone
Extension phone
To the same line
(MENU)
(START/SET)
Dial keypad
1
Press
(MENU)
.
2
Press
K
, then
D A
.
3
Press
(START/SET)
.
4
Enter the new code number.
5
Press
(START/SET)
.
6
Press
(MENU)
.
CODE=
UU
REMOTE FAX ACT.
SYSTEM SET UP
1
When a call is received, lift the handset of the
extension phone.
2
When:
—document reception is required,
—a slow beep is heard, or
—no sound is heard,
press
J J
(pre-selected remote fax activation
code) FIRMLY.
3
Replace the handset.
¡
The facsimile unit is activated for reception.
Note:
¡
Some special telephone company services
will require you to enter a service access
code. If you subscribe to such services,
whole or part of the remote fax activation
code must be different from the service
access code.