8. Programmable Features
46
8.4 Advanced features
*1 When this setting is changed using the base unit, the setting for the cordless handset will also be changed, and
vice versa.
Feature
Feature code
Selection
Setting the journal
report to print
automatically
{#}{
2
}{
2
}
{
0
}
“
OFF
”
: The unit will not print a journal report, but will keep a
record of the last 30 fax transmissions and receptions.
{
1
}
“
ON
”
(default): The unit will print a journal report automatically
after every 30 new fax transmissions and receptions (page 29).
Sending documents
overseas
{#}{
2
}{
3
}
If you cannot send a fax overseas even if the number is correct
and the line is connected, activate this feature before sending the
fax.
This feature improves the reliability by reducing the transmission
speed.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
NEXT FAX
”
: This setting is effective only for the next
attempted fax transmission. After transmission, the unit will return
to the previous setting.
{
2
}
“
ERROR
”
(default): When the previous fax transmission fails
and you wish to re-send the document.
Note:
L
Calling charges may be higher than usual.
Sending a fax at a
specified time
{#}{
2
}{
5
}
This feature allows you to take advantage of low-cost calling
hours offered by your telephone company. This feature can be set
up to 24 hours in advance of the desired time.
{
0
}
“
OFF
”
(default)
{
1
}
“
ON
”
To send a document:
1.
Insert the document.
2.
If necessary, press
{A}
or
{B}
repeatedly to select the
desired resolution (page 29).
3.
{
MENU
}
i
{#}{
2
}{
5
}
4.
Press
{
1
}
to select
“
ON
”
.
i
{
SET
}
5.
Enter the fax number.
i
{
SET
}
6.
Enter the transmission start time.
L
Press
{*}
to select
“
AM
”
or
“
PM
”
.
7.
{
SET
}
i
{
MENU
}
Note:
L
To cancel after programming, press
{
STOP
}
then
{
SET
}
.
Setting the Caller ID list
to print automatically
{#}{
2
}{
6
}
{
0
}
“
OFF
”
(default): The Caller ID list will not be printed
automatically, but the base unit will keep a record of the
information for the last 30 different callers.
{
1
}
“
ON
”
: The Caller ID list will be printed automatically each time
the base unit logs 30 different callers (page 25).
Activating the
Distinctive Ring feature
{#}{
3
}{
1
}
{
0
}
“
OFF
”
(default)
{
1
}
“
ON
”
See page 36 for details.
