n 2
he
,
[
▲
]
off
]
or
ing
off
nds.
or
3-A Automatic Security Code Setting
Each time you place the handset on the base unit, the unit
automatically selects one of a million security codes. These codes
help prevent the unauthorized use of your telephone line by another
cordless telephone user.
3
Special Features
Press
[FLASH/CALL WAIT]
if you hear a call-waiting tone while
talking.
≥
The first call is put on hold and you can answer the second call.
≥
To return to the first caller, press
[FLASH/CALL WAIT]
again.
≥
Call waiting service cannot be used when a parallel connected
telephone is in use.
≥
If this function does not operate properly, consult your telephone
company for details.
3-D For Call Waiting Service Users
Press
[ ]
(TONE) before entering access numbers which require
tone dialing.
≥
The dialing mode changes to tone. You can enter numbers to
access an answering service, electronic banking service, etc.
When you hang up, the mode will return to pulse.
3-C Temporary Tone Dialing
(For Rotary or Pulse Service Users)
3-B Handset Locator
You can locate the handset or page the handset user with beep
tones from the base unit.
1
Press
[HANDSET LOCATOR]
on the base unit.
≥
The Talk/Ringer and Ringer indicators on the handset and the
IN USE indicator on the base unit flash and the handset
beeps for 1 minute.
2
To stop paging, press
[HANDSET LOCATOR]
again or
press
[OFF]
on the handset.
4-A Battery
Recharge
When the RECHARGE indicator
flashes or the unit beeps intermittently,
place the handset on the base unit for
about 6 hours to recharge the battery.
≥
If you DO NOT recharge the handset
battery for more than 15 minutes, the
RECHARGE indicator will continue to
flash.
While in use (TALK)
Up to about 5 hours
Operation
Operating time
Up to about 11 days
While not in use (Standby)
4
Things You Should Know
Th
≥
The battery operating time may vary depending on usage
conditions and ambient temperature.
≥
Clean the charge contacts of the handset and the base unit
with a soft, dry cloth once a month. Clean more often if the
unit is subject to grease, dust or high humidity.
Otherwise the
battery may not charge properly.
≥
If the battery is fully charged, you do not have to place the
handset on the base unit until the RECHARGE indicator flashes.
This will maximize the battery life.
≥
The battery cannot be overcharged.
Battery information
After your Panasonic battery is fully charged:
For assistance, please call: 1-800-211-PANA(7262)
ar
N at
ator
ncer
e
RECHARGE
Indicator
4-B Belt Clip
You can hang the handset on your belt or pocket using the included
belt clip.
To attach the belt clip
To remove the belt clip
Battery replacement:
If you cleaned the charge contacts and fully charged the battery,
but after a few telephone calls, the RECHARGE indicator
flashes, the battery needs to be replaced. Please order a new
Panasonic HHR-P513 (N4HHEPA00001) battery at the
telephone number shown on section 1-A. To replace the battery,
see section 1-C, step 2.
A nickel metal hydride battery that is recyclable
powers the product you have purchased. Please call
1-800-8-BATTERY for information on how to recycle
this battery.
PQQX13574XA 6/13/03 3:47 PM ページ 5
