Making/Answering Calls Using the Base Unit
26
For assistance, please visit http://www.panasonic.com/help
Adjusting the base unit ringer volume
Press
{^}
or
{V}
repeatedly to select the
desired volume while the base unit is
ringing for a call.
L
To turn the ringer off, press and hold
{V}
until the unit beeps.
Note:
L
You can also program the base unit
ringer volume beforehand (cellular
lines: page 36, landline: page 37).
Useful features during
a call
Hold
This feature allows you to put an outside
call on hold.
1
Press
{
HOLD
}
during an outside
call.
2
To release hold on the cellular
line:
Press
{
CELL 1
}
or
{
CELL 2
}
.
L
A handset user can take the call:
{
CELL
}
*1
i
{
SELECT
}
*1 The call is taken when:
– only 1 cellular phone is
registered.
– the line is set to make
cellular calls (page 18).
To release hold on the landline:
Press
{
SP-PHONE
}
.
L
A handset user can take the
landline call by pressing
{C}
.
Note:
L
While a cellular line is on hold, the
CELL 1 or CELL 2 indicator flashes
red. While a landline call is on hold,
the SP-PHONE indicator flashes.
L
If a call is kept on hold for more than 9
minutes, an alarm tone starts to
sound. After 1 additional minute on
hold, the call is disconnected.
L
If another phone is connected to the
same line (page 9), you can also take
the landline call by lifting its handset.
Mute
While mute is turned on, you can hear
the other party, but the other party
cannot hear you.
1
Press
{
MUTE
}
during conversation.
L
The SP-PHONE indicator on the
base unit flashes.
2
To return to the conversation, press
{
MUTE
}
again.
Flash for landline calls
{
FLASH
}
allows you to use the special
features of your host PBX such as
transferring an extension call, or
accessing optional telephone services.
Note:
L
To change the flash time, see page
38.
For call waiting service users
To use call waiting, you must first
subscribe to call waiting from your
service provider/telephone company.
This feature allows you to receive calls
while you are already talking on the
phone. If you receive a call while on the
phone, you will hear a call waiting tone.
1
Press
{
CALL WAIT
}
to answer the
2nd call.
2
To switch between calls, press
{
CALL WAIT
}
.
Note:
L
Please contact your service provider/
telephone company for details and
availability of this service in your area.
TG658x(e).book Page 26 Friday, February 26, 2010 7:50 AM
