Using Bluetooth Devices
48
For assistance, please visit http://www.panasonic.com/help
Using a Bluetooth
wireless headset
(optional) for landline
calls
By registering a Bluetooth headset to the
base unit, you can have a hands-free
conversation wirelessly for landline
calls.
Important:
L
1 headset can be registered to the
base unit. However, only one
Bluetooth device (cellular phone or
headset) can be connected to the
base unit at a time.
L
For best performance, we
recommend using a Bluetooth
headset within 1 m (3.3 feet) of the
base unit. A headset can
communicate with the base unit within
a range of approximately 10 m (33
feet).
Registering a headset
Important:
L
Make sure that the Bluetooth headset
is not connected to any other
Bluetooth device.
1
Your headset:
Set your headset to registration
mode.
L
Refer to the headset operating
instructions.
2
Handset:
{
MENU
}
i
{#}{
6
}{
2
}{
1
}
3
Enter your headset PIN.
L
Typically, default PIN is
“
0000
”
.
Refer to the headset operating
instructions.
4
Press
{
OK
}
, then wait until a long
beep sounds.
5
{
OFF
}
L
When the HEADSET indicator on
the base unit lights green, you are
ready to use the headset.
Connecting/disconnecting a headset
If you cannot connect the headset and
base unit using the headset, you can
connect using the unit.
To use your headset with another
Bluetooth device such as a cellular
phone, you may need to disconnect it
from the base unit.
Important:
L
Make sure that the headset is turned
on.
To connect:
{
HEADSET
}
To disconnect:
Press and hold
{
HEADSET
}
until a long
beep sounds.
1
To connect/disconnect:
{
MENU
}
i
{#}{
6
}{
2
}{
2
}
L
A long beep sounds.
2
{
OFF
}
Deregistering a headset
You can cancel a registration of the
headset that is stored to the base unit.
See “Deregistering Bluetooth devices”,
page 19.
Operating a Bluetooth
wireless headset using the
landline
Important:
L
For headset operations, refer to your
headset operating instructions.
Base unit
Handset
TG658x(e).book Page 48 Friday, February 26, 2010 7:50 AM
