20
EN
Available on the cooking zone with
.
1. Touch
and hold the main power key to turn on
the power.
2.
Select the cooking zone with
. For
large cookware, the whole flex cooking zone can
also be selected by touching either front or rear
cooking zone selector twice.
3.
Touch Autoboil key
.
The appliance beeps 5 times
when the water reaches boiling point and maintains
a rolling boil. After beeping add ingredients and
adjust the heating power with the slider as required.
4. Touch and hold the key of the cooking zone or
set the power level to “OFF” to turn off.
Autoboil Mode
IH Cooking
NOTE
■
The cookware size and material (e.g. non-stick coating) and the
volume of water may affect the sensor detection. If the water has
not boiled after beeping or it has boiled but the appliance does not
beep, select a power level as required.
■
Cooking Timer can be used with Autoboil Mode. (See page 27)
NOTE
Temperature ‘100’ will flash in the display until the
boiling temperature is reached. After the water is
boiled, the appliance automatically sets the power
level to “7”.
Increase or decrease the power level as
required.
