2
3
WARNING:
Failure to follow these instructions may cause
death or serious injury.
- When performing the installation, follow these instructions
properly.
Improper installation may cause an electric leakage or
fire.
- Install 240 V / 40 A dedicated single phase circuit with the
earth leakage circuit breaker for the power supply.
The
electrical wiring may abnormally overheat if the dedicated circuit is
not properly connected.
- Electrical work must be performed by a legally qualified
electrician.
Improper wire connections may cause electric
leakages or fires.
- Ground the appliance following the electric laws.
Failure to do
so may cause electric shock due to electric leakages.
CAUTION:
Failure to follow these instructions may cause
injury or property damage.
- Use heat resistant materials for the countertop. However, do
not use varnished materials as they might get discolored.
The material of the countertop should have heat resistancy equal
to or exceeding “laminated thermosetting high-pressure decorative
sheets”. If the materials are not heat resistant, they may get
deformed or cause a fire.
Please fully observe the following safety precautions.
IMPORTANT
- Install the appliance in accordance with the Installation
Instructions. Otherwise, the performance of the appliance
may be affected.
- Make sure to perform a test run and explain to the customer
how to properly use the appliance.
- Proper installation is the responsibility of the installer. Any
malfunction or accident resulting from the failure to follow
Installation Instructions is not covered under guarantee.
- Hand these Installation Instructions to the customer for the
local electrical inspector’s use.
- Have a qualified electrician ground the appliance.
Improper
grounding may cause an electric shock.
- Before performing the installation, definitely turn off the
circuit breaker.
This can prevent electric shock.
- The power cord must be accurately connected to ensure the
integrity of the connection.
Improper wire connections may
cause electric leakages or fires.
- If the power cord is damaged, it must be replaced by the
manufacturer or its service agent or a similar qualified person in
order to avoid a hazard.
- Do not disassemble, repair or modify the appliance (the
top plate, for example).
Doing so may cause the appliance to
operate abnormally and may result in danger.
- Do not step on the appliance, or drop heavy items on top of
it.
Cracks in the top plate may cause overheating, malfunctions or
electric shocks.
- Do not touch high temperature parts, such as the top plate.
Safety Precautions
