EN-
24
Available on the cooking zone with
.
1. Touch and hold the main power key to turn on
the power.
2. Select the cooking zone with
.
For large cookware, the whole flex cooking zone
can also be selected by touching either front or rear
cooking zone selector twice.
3. Touch Autoboil key.
The appliance beeps 5 times
when the water reaches boiling point and maintains
a rolling boil. After beeping add ingredients and
adjust the heating power with the slider as required.
Autoboil Mode
IH Cooking
NOTE
■
Cookware with a non-stick coating may affect the sensor detection.
After beeping, adjust the power level as required.
■
Cooking Timer can be used with Autoboil Mode.
(See page 29)
NOTE
Temperature ‘100’ will flash in the display until the
boiling temperature is reached. After the water is
boiled, the appliance automatically sets the power
level to “7”. Increase or decrease the power level as
required.
Autoboil Mode is developed for boiling water only.
To achieve the optimum performance, the following is
recommended.
■
Use a lid until boiling.
■
Use a minimum of 0.5 L of water. If a larger pan
that covers 3 or more areas of flex cooking zone,
use a minimum of 1 L of water.
■
Minimum 1 cm of depth when flex cooking zone is
used.
In order to prevent water boiling over from the pan, the
following is recommended.
■
No more than 70% pan capacity should be used.
■
There should be a minimum gap of 3 cm between
the lid and the water surface.
KY-B925GL
KY-B915AL
KY-B915AB
Min. 0.5 L / 1 L
Min. 3 cm
4. Touch and hold the key of the cooking zone or
set the power level to “OFF” to turn off.
