9
Finish cooking
1. Turn off the cooking zone by touching
to
, or touching
and
simultaneously.
2. Turn off the whole cooking zone by touching the OFF/ON control,
.
Timer Function
The timer can be used for either operation below:
1
To set as Reminder. In this case, the timer will not turn any cooking zone off when the
set time is up.
2
To set time to turn only one cooking zone off when the set time is up.
• You can cancel the timer by touching
to
, or touching
or
simultaneously.
will be visible on the display.
• Touch the
or
control of the “Programme Time Control” to decrease or increase
timer by 1 minute.
• Hold the
or
control of the “Programme Time Control” to decrease or increase
timer by 10 minutes.
For 1 condition
In standby mode,
1. Touch
or
on the selected cooking zone.
2. Wait for the power level indicator to stop flashing.
3. Touch
or
on the “Programme Time Control” to set the time. (0-99 minutes)
4. It will begin to countdown immediately. The display will show the remaining time.
Alternatively, you can operate the timer in following steps:
• Touch
or
on the “Programme Time Control” fi rst, then touch
or
on the
selected cooking zone without waiting any indicator to stop fl ashing.
■
Note:
1. A beep will sound after the timer reaches
.
will be visible on the display.
Touch any control on the display to stop the beep.
2. The heating will continue until the operation is cancelled, or the Ceramic Hob will
shutdown automatically based on default heating time. (Refer to “Auto Shutdown
Protection”)
3. During the countdown, the power level can be changed by touching
or
on the
corresponding cooking zone.
Using the Ceramic Hob