Installation of this unit
Installation
30
8
Inspect the UD guide part of the gear rack on
the drawer side.
≥
Use the UD guide check fixture to check all the gaps in
the connection parts of the gear rack.
≥
UD guide check: pattern 1
≥
UD guide check: pattern 2
(for parts other than the connection with the
Bottom Module)
≥
UD guide check: pattern 3
(for the connection with the Bottom Module)
UD guide check fixture
Gap under 1.5 mm (0.06
q
)
Check the gap between the gear rack on the
drawer side and the UD guide by moving the
fixture down.
Under 1.5 mm
(0.06
q
)
1.5 mm (0.06
q
) or more
Refer to the
following "Error
flow chart".
OK
Error
Gap
under 1.5 mm
(0.06
q
)
Check the gap between the gear rack on the
drawer side and the UD guide by moving the
fixture up.
Under 1.5 mm
(0.06
q
)
1.5 mm (0.06
q
) or more
Refer to the
following "Error
flow chart".
OK
Error
Gap
under 1.5 mm
(0.06
q
)
Check the gap between the gear rack on
the drawer side and the UD guide by
moving the fixture down to the Bottom
Module side.
Under 1.5 mm
(0.06
q
)
1.5 mm (0.06
q
) or more
Refer to the
following "Error
flow chart".
OK
Error
