15
Introduction
Handling a magazine and magazine drawer
The following labels can be attached to a user label area of a magazine.
`
1D or 2D code label (only one of them)
`
Label with a character string (for magazine management)
The 1D/2D code label and the character string label can be used separately or together. However, the label should
be attached in the predetermined area and not overlap each other.
The 1D/2D code label of the specifications below can scan information with the built-in scanner of the unit
and display it on the Web interface.
<
Specifications on 1D codes
>
Standard:
Code39
Label size:
14 mm (0.55
z
) (H)
k
70 mm (2.75
z
) (W) or smaller (with margins)
Maximum number of characters:
12 characters (without stop and start codes)
Thin bar width:
12 mil (= 0.305 mm (0.012
z
)) or more
Ratio of thin bars to thick bars:
1:2.75
Inter-character gap:
12 mil (= 0.305 mm (0.012
z
)) or more
Bar length:
7 mm (0.28
z
) or more
Leading and trailing margins:
3.05 mm (0.12
z
) or more
Color (recommended)
Black (code), White (background)
<
Specifications on 2D codes
>
Standard:
QR code (Model 2)
Label size:
14 mm (0.55
z
) (H)
k
14 mm (0.55
z
) (W) or smaller (with margins)
Maximum number of characters:
256 characters (alphabetic character and number), 256 byte (UTF-8)
Cell size:
4 dots* or more and 0.254 mm (0.01
z
) or more per side
Margins in four directions:
4 cells or more (A larger size is easier to read)
Color (recommended)
Black (code), White (background)
* “dot” refers to the smallest printing unit of a printing device.
e.g., Printing with the maximum size of 14 mm (0.55
z
)
k
14 mm (0.55
z
)
600 dpi printer: Printable with Version 7 or earlier (45
k
45 cells)
300 dpi printer: Printable with Version 4 or earlier (33
k
33 cells)
User label
e.g.,
70 mm (2.75
z
) or smaller
7 mm (0.28
z
) or more, 14 mm (0.55
z
) or smaller
DATA ARCHIVER
e.g.,
14 mm (0.55
z
) or smaller
14 mm (0.55
z
) or smaller
