4
Introduction
System configuration
Connect various ports of the unit to a power source and server according to the functions to be used.
≥
When adding Extension Modules (with the Writer Unit), they need to be added in increments of two. Connect two SAS cables
(straight) and one SAS cable (branch) to each pair of Extension Modules to be added.
Peripheral devices
Apart from the DATA ARCHIVER and SAS cables, prepare the
following:
≥
Converter
`
Panasonic, Model number: LB-XACVU0
≥
19-inch rack (
≥
External power supply (DC
i
12 V, DC
i
24 V)
TDK-Lambda HFE Series
`
Shelf racks: Model number HFE1600-S1U
`
12V power supply unit: Model number HFE1600-12/S
`
24V power supply unit: Model number HFE1600-24/S
≥
Server
`
Install DATA ARCHIVER control software and the driver
for the interface adapter.
For the attachment and setup procedures, refer to
pertinent server and interface adapter manuals
System configuration
Extension Module
(without the Writer Unit)
External power supply
Server
(DATA ARCHIVER
control software)
Exclusive use connection cable A
Exclusive use connection cable B
DC cable (+24 V)
DC cable (+24 V/+12 V)
SAS cable (Straight)
SAS cable (Branch)
Exclusive use connection cable
supplied with the converter
Base Module
Extension Module
(with the Writer Unit)
Bottom Module
System configuration example
This unit
Converter
19-inch rack
