134
⿎
Delay : DLY
Sets the delay time and distance from trigger input to marking startup.
•
Setting / Readout data of delay
STX
DLY
Sub
command
[Delay time/distance]
6-byte
(Check
sum)
Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
•
Readout request of delay
STX
DLY
R
(Check sum)
Delimiter
Name
Data
length
[byte]
Description
Remarks
Delay time/
distance
6
•
Delay Time: “000000”–“005000” [ms]
•
Delay Distance: “000.00”–“500.00” [mm]
•
When the moving speed is “still”,
delay time is shown and the marking
start time after the trigger input is
displayed.
•
When the moving speed is other than
“still”, delay distance is shown and
the distance where the marking starts
after the trigger input is displayed.
⿎
Marking interval : INT
Sets the marking interval (distance) in “Equidistant Marking” setting for flying object marking.
•
Setting / Readout data of marking interval
STX
INT
Sub
command
[Marking interval]
6-byte
(Check
sum)
Delimiter
Sub command is “S” at the time of setting and “A” for response data at the time of readout.
•
Readout request of marking interval
STX
INT
R
(Check sum)
Delimiter
Name
Data
length
[byte]
Description
Remarks
Marking interval
6
“0000.0”–“3000.0” [mm]
Available only when the moving direction is other than
“still” and trigger type is “equidistant”.
ME-LP400V-EX-6
Summary of Contents for LP-400 Series
