9
Digital Laser Sensor
LS-400
SERIES
SPECIFICATIONS
Sensor heads
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C
+73.4 °F
.
2) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and
Radiological Health) under the FDA (Food and Drug Administration). For details, refer to the Laser Notice No. 50.
3)
LS-H22
(
F
) is the set model No. for
LS-H21
(
F
) long sensing range spot reflective type sensor head combined with the
LS-MR1
lens attachment for line
reflective type. Hence,
LS-H21
(
F
) appears on the sensor head itself.
4) The sensing range is the value for the
RF-330
[
RF-230
for the
LS-H92
(
F
)] reflector. In addition, the sensing range is the possible setting range for the
reflector. The sensor can detect an object less than 0.1 m
0.328 ft
[
LS-H92
(
F
): 0.2 m
0.656 ft
] away. Note that if there are white papers or specular
objects near the sensor head, reflected light from these objects may be received. In such cases, use the M.G.S. function of the amplifier unit to change
the response time or incident light sensitivity.
5) Cable cannot be extended.
Type
Coaxial retroreflective
Diffuse reflective
Class 2
Class 1
Long sensing range spot reflective Long sensing range
line reflective
Class 2
Class 1
Model No.
IEC / JIS / GB standards
conforming type
LS-H92
LS-H91
LS-H91-A
LS-H21
LS-H21-A
LS-H22
(Note 3)
Item
FDA (Note 2) / IEC / JIS
standards conforming type
LS-H92F
LS-H91F
LS-H91F-A
LS-H21F
LS-H21F-A
LS-H22F
(Note 3)
CE marking directive compliance
EMC Directive, RoHS Directive
Applicable amplifiers
LS-401
(
P
),
LS-401
(
P
)
-C2
,
LS-403
Sensing range
U-LG mode
0.2 to 30 m
0.656 to 98.425 ft
(Note 4)
0.1 to 7 m
0.328 to 22.966 ft
(Note 4)
0.1 to 5 m
0.328 to 16.404 ft
(Note 4)
30 to 1,000 mm
1.181 to 39.370 in
30 to 500 mm
1.181 to 19.685 in
30 to 1,000 mm
1.181 to 39.370 in
STD mode
0.2 to 20 m
0.656 to 65.617 ft
(Note 4)
0.1 to 5 m
0.328 to 16.404 ft
(Note 4)
0.1 to 3 m
0.328 to 9.843 ft
(Note 4)
30 to 500 mm
1.181 to 19.685 in
30 to 250 mm
1.181 to 9.843 in
30 to 500 mm
1.181 to 19.685 in
FAST mode
0.2 to 10 m
0.656 to 32.808 ft
(Note 4)
0.1 to 3 m
0.328 to 9.843 ft
(Note 4)
0.1 to 1 m
0.328 to 3.281 ft
(Note 4)
30 to 300 mm
1.181 to 11.811 in
30 to 150 mm
1.181 to 5.906 in
30 to 300 mm
1.181 to 11.811 in
H-SP mode
Operation indicator
Orange LED (lights up when the amplifier output is ON)
Laser emission indicator
Green LED (lights up during laser emission)
Spot-shape adjuster
–
Multi-turn adjuster
Environmental resistance
Protection
IP40 (IEC)
Ambient temperature
–10 to +55 °C
+14 to +131 °F
(No dew condensation or icing allowed), Storage: –20 to +70 °C
–4 to +158 °F
Ambient humidity
35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminance
Incandescent light: 3,000 ℓx or less at the light-receiving face
Voltage withstandability
1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance
10 to 500 Hz frequency, 1.5 mm
0.059 in
(10 G max.) double amplitude in X, Y and Z directions for two hours each
Shock resistance
100 m/s
2
acceleration (10 G approx.) in X, Y and Z directions three times each
Emitting element
IEC / JIS / GB standards
conforming type
Red semiconductor laser,
Class 2 (IEC / JIS / GB)
Max. output: 3 mW
Peak emission wavelength: 655 nm
0.026 mil
Red semiconductor laser,
Class 1 (IEC / JIS / GB)
Max. output: 1 mW
Peak emission wavelength:
655 nm
0.026 mil
Red semiconductor laser,
Class 2 (IEC / JIS / GB)
Max. output: 3 mW
Peak emission wavelength:
655 nm
0.026 mil
Red semiconductor laser,
Class 1 (IEC / JIS / GB)
Max. output: 1 mW
Peak emission wavelength:
655 nm
0.026 mil
Red semiconductor laser,
Class 2 (IEC / JIS / GB)
Max. output: 3 mW
Peak emission wavelength:
655 nm
0.026 mil
FDA (Note 2) / IEC /
JIS standards
conforming type
Red semiconductor laser,
Class 2 (FDA / IEC / JIS)
Max. output: 3 mW
Peak emission wavelength: 655 nm
0.026 mil
Red semiconductor laser,
Class 1 (FDA / IEC / JIS)
Max. output: 1 mW
Peak emission wavelength:
655 nm
0.026 mil
Red semiconductor laser,
Class 2 (FDA / IEC / JIS)
Max. output: 3 mW
Peak emission wavelength:
655 nm
0.026 mil
Red semiconductor laser,
Class 1 (FDA / IEC / JIS)
Max. output: 1 mW
Peak emission wavelength:
655 nm
0.026 mil
Red semiconductor laser,
Class 2 (FDA / IEC / JIS)
Max. output: 3 mW
Peak emission wavelength:
655 nm
0.026 mil
Material
Enclosure: PBT (Mounting part: PEI), Lens cover: Acrylic
Cable
0.1 mm
2
, single core two parallel shielded cables, 2 m
6.562 ft
long (Connector for amplifier attached) (Note 5)
Weight
Net weight: 30 g approx.
Gross weight: 40 g approx.
Net weight: 30 g approx.
Gross weight: 45 g approx.
Net weight: 30 g approx.
Gross weight: 40 g approx.
Net weight: 35 g approx.
Gross weight: 45 g approx.
Accessories
RF-230
(Reflector):
1 pc.
Warning label: 1 set
Labels are written in
Japanese, English and
Chinese for compliance
with various standards.
RF-330
(Reflector):
1 pc.
Warning label: 1 set
Labels are written in
Japanese, English and
Chinese for compliance
with various standards.
RF-330
(Reflector):
1 pc.
Explanation label: 1 set
Labels are written in
Japanese and Chinese
for compliance with
various standards.
Warning label: 1 set
Labels are written in
Japanese, English and
Chinese for compliance
with various standards.
Explanation label: 1 set
Labels are written in
Japanese and Chinese
for compliance with
various standards.
LS-MR1
Lens attachment
for line reflective : 1 pc.
Warning label: 1 set
Labels are written in
Japanese, English and
Chinese for compliance
with various standards.