133
4K Photo and Drive Settings
Adjusting the focus after recording ([Post Focus]/[Focus Stacking])
Select the focus range to combine and create a single picture
([Focus Stacking])
Near
Focus
Distant
1
Touch [ ] on screen in step
2
of “Select the focus point and save the picture
([Post Focus])”
•The same operation can be performed by pressing the [Fn1] button.
2
Choose a stacking method and touch it
[Auto Merging]
Automatically select photos suitable for stacking and combine them into one
picture.
•Choose by giving preference to near-focus pictures.
•Perform the focus stacking and save the picture.
[Range Merging]
Combine the pictures with the selected focus position into one picture.
(When selecting [Range Merging])
3
Touch the focus point
•Select positions at two or more points.
•Focus points between the selected two positions will be
selected.
•Positions that cannot be selected, or that would produce an
unnatural result will be grayed out.
•Touch a position again to deselect it.
•If you drag the screen you can then continue to select positions.
Operation
Touch operation
Description
Touch
Select the position
[Fn2]
[Set/Cancel]
Set/Clear the position
[DISP.]
[All]
Select all positions (Before
selecting position)
[Reset]
Deselect All (After selecting
position)
[MENU/SET]
Combine and save picture
Set/Cancel
Set/Cancel
Reset
Reset
Set/Cancel
Set/Cancel
Reset
Reset
