28
8.4.
Lens Disassembly Procedure
Precaution:
1. Do not remove the CCD when disassembling or re-
assembling the lens in order to maintain it clean.
When remove it, refer to item "8.6.".
2. Keep dust or dirt away from the lens.
3. To remove dirt or dust from the lens, blow with dry air.
4. Do not touch the lens surface.
5. Apply grease (RFKZ0472) as shown on "THE APPLICA-
TION OF GREASE METHOD" in the figure.
6. Apply a light coat of grease using an object similar to a
toothpick.
7. The drive frame unit and penetration cam frame should
be replaced as a unit.
8.4.1.
Removal of the Zoom Motor and
Lens FPC Unit
1. Remove the 3 tapes.
2. Unscrew the 2 screws (A).
3. Remove the zoom motor to the direction of arrow (1).
4. Unscrew the 1 screw (B).
5. Remove the photo sensor.
6. Remove the 13 solders (A).
7. Remove the 3 solders (B).
8. Remove the 5 locks.
Summary of Contents for Lumix DMC-FS35EB
