29
8.4.
Lens Disassembly Procedure
Precaution:
1. Do not remove the CCD when disassembling or re-
assembling the lens in order to maintain it clean.
When remove it, refer to item “8.6.”.
2. Keep dust or dirt away from the lens.
3. To remove dirt or dust from the lens, blow with dry air.
4. Do not touch the lens surface.
5. Apply grease (RFKZ0472) as shown on “THE APPLICA-
TION OF GREASE METHOD” in the figure.
6. Apply a light coat of grease using an object similar to a
toothpick.
7. The drive frame and direct frame should be replaced as a
unit.
8.4.1.
Removal of the Zoom Motor Unit
and Lens FPC P.C.B. Unit
1. Remove the tape.
2. Remove the 16 solder (A).
3. Remove the 4 solder (B).
4. Unscrew the 2 screws (A).
5. Unscrew the 1 screw (B).
6. Remove the photo sensor.
7. Remove the zoom motor unit to the indicated by arrow
(1).
8. Remove the lens FPC P.C.B. unit to the indicated by
arrow (2).
