15
Attribute
Main item
Sub item
Error code
Contents (Upper)
High 4 bits Low 4 bits
Check point (Lower)
LENS
Lens drive
OIS
1800
1000
PSD (X) error. Hall element (X axis) position detect error in OIS unit.
OIS Unit
2000
PSD (Y) error. Hall element (Y axis) position detect error in OIS unit.
OIS Unit
3000
GYRO (X) error. Gyro (IC7102: X axis) detect error on Main P.C.B..
IC7102 (Gyro element) or IC6001 (VENUS PLUS)
4000
GYRO (Y) error. Gyro (IC7101: Y axis) detect error on Main P.C.B..
IC7101 (Gyro element) or IC6001 (VENUS PLUS)
5000
MREF error (Reference voltage error).
IC7001 (LENS drive) or IC6001 (VENUS PLUS)
6000
Drive voltage (X) error.
VENUS PLUS AD value error, LENS Unit, LENS flex breaks etc.
7000
Drive voltage (Y) error.
VENUS PLUS AD value error, LENS Unit, LENS flex breaks etc.
C.B./Zoom
0100
HP Low detect error (C.B. encoder (full retract) always Low detect).
FP9802-(6, 9) signal line or IC6001 (VENUS PLUS)
0200
HP High detect error (C.B. encoder (full retract) always High detect).
FP9802-(6, 9) signal line or IC6001 (VENUS PLUS)
0300
ENC1 detect error (C.B. motor encoder detect error).
0400
ENC2 detect error (C.B. motor encoder detect error).
Zoom
0010
HP Low detect error (Zoom encoder always Low detect error).
0020
HP High detect error (Zoom encoder always High detect error).
Focus
0001
HP Low detect error (Focus encoder always Low detect error).
FP9802-(35) signal line or IC6001 (VENUS PLUS)
0002
HP High detect error (Focus encoder always High detect error).
FP9802-(35) signal line or IC6001 (VENUS PLUS)
Lens
1801
0000
Power ON time out error.
Lens drive system
1802
0000
Power OFF time out error.
Lens drive system
Adj.History
OIS
1900
2000
OIS adj. Yaw direction amplitude error (small)
3000
OIS adj. Pitch direction amplitude error (small)
4000
OIS adj. Yaw direction amplitude error (large)
5000
OIS adj. Pitch direction amplitude error (large)
6000
OIS adj. MREF error
7000
OIS adj. time out error
8000
OIS adj. Yaw direction off set error
9000
OIS adj. Pitch direction off set error
A000
OIS adj. Yaw direction gain error
B000
OIS adj. Pitch direction gain error
C000
OIS adj. Yaw direction position sensor error
D000
OIS adj. Pitch direction position sensor error
E000
OIS adj. other error
HARD
VENUS A/D
Flash
2800
0000
Flash charging error.
IC6001-(13) signal line or Flash charging circuit
FLASH ROM
(EEPROM
Area)
FLASH ROM
(EEPROM
Area)
2B00
0001
EEPROM read error
IC6002 (FLASH ROM)
0002
EEPROM write error
IC6002 (FLASH ROM)
SYSTEM
RTC
2C00
0001
SYSTEM IC initialize error
Communication between IC6001 (VENUS PLUS) and IC9101 (SYSTEM)
Summary of Contents for Lumix DMC-FX01PP
