background image

Recording images (basic)

36

: Forced OFF

When you do not open the flash, this mode 
is set. Even in dark places, the flash does 
not fire.
Set it when you take pictures in places 
where using flash is not allowed.

3

Take a picture.

• The recording method is the same as in 

“Taking Pictures”. (P28)

To close the flash

4

Press in the direction of the arrow 
until it clicks.

• Be sure to close the flash when you do 

not use it.

• Do not stare at the flash light from close proximity when using the flash.
• The available flash range is about 0.98 feet (30 cm) - 6.86 feet (2.1 m). (when 

setting to ISO100)

• When the shutter jiggle alert is displayed within the available flash range, we 

recommend using the flash.

• Do not cover the flash sensor 

1

 with your finger or any other item. Otherwise the 

picture will not be exposed properly.

• In motion image mode [

] or when the flash is closed, flash setting is fixed to the 

Forced OFF [

].

• When you set to burst mode or auto bracket, only 1 picture is taken for every flash 

firing.

• In night portrait mode [

], setting is fixed to Slow sync./Red-eye reduction 

[

].

• When you take a picture using the flash with the lens hood attached, the flash light 

may be interrupted by the hood.

• The flash indication becomes red when pressing the shutter button halfway.
• When the flash is being charged, the flash indication blinks red, and you cannot 

take a picture even when you press the shutter button fully.

• When using the flash, do not let subjects get too close to the flash. The shape or 

color of subjects may be changed because of the heat and light of the flash.

• Be sure to open the flash entirely when using the flash.
• When taking a picture with the flash, the white balance will be automatically 

adjusted (except for manual white balance setting), but the white balance may not 
be properly adjusted when the flash light is insufficient.

• When taking a picture with the flash after setting the white balance manually, the 

white balance may not be properly adjusted. We recommend setting the white 
balance to [AUTO] when using the flash. (P55)

3

4

KC72‑PP.book  36 ページ  2002年12月12日 木曜日 午後7時38分

Summary of Contents for Lumix DMC-FZ1













































































































Reviews: