background image

Recording pictures (advanced)

63

This mode allows you to take pictures 
against a night landscape. The subject can 
be recorded with brightness in real life by 
using the flash and the slow shutter speed.

Technique for Night portrait mode

• Open the flash. (P41)
• Since the shutter speed becomes slow 

(max. about 1 sec.), we recommend using 
a tripod.

• Keep the subject still for about 1 second 

when taking a picture.

• Take a picture within the available flash 

range (about 30 cm – 2.3 m) of the 
subject.

• We recommend rotating the zoom lever to 

Wide.

• The focus range is 120 cm – 5 m.
• Be sure to close the flash when not in use.
• The shutter may be kept closed (max. 

about 1 sec.) after taking a picture with 
slow shutter speed, but this is not a 
malfunction.

• When you take pictures in dark places, 

noises may become visible.

• Flash setting is fixed to Slow sync./

Red-eye reduction [

].

• The ISO sensitivity is fixed to [AUTO].
• The setting on the continuous AF is 

disabled.

When you take a picture following the 
motion of a subject which moves in a 
certain direction such as a runner or a car, 
the background will show some motion blur. 
This special effect is called “panning”. This 
mode allows you to obtain this effect easier.

Technique for Panning mode

To achieve good pictures in panning mode, 
pick a horizontal plane – and then pan as 
you fire shots. 

1

 Move the camera smoothly while 

tracking a subject in motion.

2

 Press the shutter button while moving 

the camera.

3

 Keep moving the camera continuously.

• Be careful of the following:

– Use the Viewfinder. (P28)
– Select the subject with quick motion.
– Prefocus to the point where the subject 

will arrive. (P74)

– Use this mode with burst mode (P47). 

Select the best picture from the pictures 
taken.

Night portrait mode

2016

19

Panning mode

2016

19

FZ3-EB.book  63 ページ  2004年7月9日 金曜日 午後6時24分

Summary of Contents for LUMIX DMC-FZ3EB





















































































































Reviews: