- 65 -
Basic
•
Press the shutter button halfway or turn the camera off and on to cancel [SLEEP MODE].
•
[SLEEP MODE] is set to [5MIN.] in the Intelligent Auto (
ñ
or
) Mode.
•
[SLEEP MODE] is fixed to [2MIN.] when [AUTO LCD OFF] is set to [15SEC.] or [30SEC.].
•
Press any button to turn on the LCD monitor again.
•
[SLEEP MODE] does not work in the following cases.
–
When using the AC adaptor
–
When connecting to a PC or a printer
–
When recording or playing back motion pictures
–
During a slide show
•
If it is set to [HOLD] when the camera is set to [
] or [
], switching of the playback screen
display or enlargement by rotating the control dial is possible during Auto Review.
•
Regardless of the Auto Review setting, pictures will automatically be reviewed when taking
burst pictures with [H] set, and recording with Auto Bracket. (Will not hold)
•
If [HIGHLIGHT] is set to [ON], white saturated areas appear blinking in black and white when
the Auto Review function is activated.
•
[AUTO REVIEW] is disabled when Burst Mode is set to [M] or [L].
•
When [AUTO REGISTRATION] in [FACE RECOG.] is set to [ON], [AUTO REVIEW] can only be
set to [3SEC.] or [5SEC.].
q
[ECONOMY]
You can conserve the battery life by setting these menus.
Also, it will turn off the LCD monitor automatically when not in use
to prevent discharge of the battery.
p
[SLEEP MODE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]
[AUTO LCD OFF]:
The LCD monitor is automatically turned off if the camera has not
been used for the time selected on the setting.
[OFF]/[15SEC.]/[30SEC.]
o
[AUTO REVIEW]
Set the length of time that the picture is displayed after taking it.
[OFF]/[1SEC.]/[3SEC.]/[5SEC.]
[HOLD]:
The pictures are displayed until shutter button is pressed halfway.
