Others
36
• The default workgroup name is set to “WORKGROUP”. If you changed the workgroup name,
the PC will not be recognised.
In [Change Workgroup Name] in [PC Connection] of the [Wi-Fi Setup] menu, change the
workgroup name to that of the PC you are connecting to.
• When the system time of Mac computer or Windows PC connected to a camera differs severely
from that of the camera, the camera cannot be connected to the computer or PC in some OSs.
• Some OS versions, including Windows 8, use two types of accounts: a local account and a
Microsoft account.
>
Be sure to use the user name and password for the local account.
• Image cannot be transmitted when the battery indicator is flashing red.
• Is the size of the image too large?
>
Reduce the image size at [Size], and then send.
>
Transmit after dividing the motion picture with [Video Divide].
• File format of the motion picture that can be sent differs depending on the destination.
• Capacity or number of images in the web service is full.
>
Login to “LUMIX CLUB”, and check the status of the destination on the web service link
settings.
• If the camera is shaken, it may cause the shutter to close. This is not a malfunction. Do not put
your finger in the mount. Turning on the camera will re-open the shutter.
• It is a sound of lens movement or aperture operation when this unit is turned on or off, and it is
not a malfunction.
• The sound, which is caused by the automatic adjustment of the aperture, is heard when the
brightness has changed due to, for example, zooming or the movement of the camera. This is
not a malfunction.
• The surface of the camera may become warm during use. This does not affect the performance
or quality of the camera.
• If you do not use the camera for a long time, the clock may be reset.
>
[Please set the clock] message will be displayed; please reset the clock. (P11)
The PC is not recognised when I use a Wi-Fi connection. The camera cannot be
connected to PC via Wi-Fi connection.
When I try to set up a Wi-Fi connection with a Windows 8 PC, my user name and
password are not recognised, so I cannot connect to the PC.
Transmission of the image fails midway. Some images cannot be transmitted.
The shutter remains closed when the camera is turned off (including Sleep
Mode).
There is a sound from lens unit.
The camera becomes warm.
The clock is reset.
DMC-GM1S_eng.book 36 ページ 2015年1月19日 月曜日 午後1時30分