Before Use
- 10 -
1
:With the [LOCK] switch released, close the card/battery door and
terminal cover by pushing until you hear a click.
•
To prevent water seeping into the camera, be careful not to trap foreign objects such as
liquids, sand, hair or dust etc.
•
Closing the door with the [LOCK] switch in the locked state may result in damage or
leaks.
2
:Slide the [LOCK] switch in the direction of the arrow until the
visible red portion is no longer visible and the switch is locked.
•
If you use the camera without securely closing the door and cover, it may open and
close on its own.
Note
•
If there is any foreign object, remove it with
attached brush.
•
Sand and dust etc. will unintentionally
adhere to the camera by lodging in between
the gap around the card/battery door or
terminal cover when used in the following
locations:
–
Where sand is floating, such as in the sea
or water etc.
–
Where there is a lot of sand or dust, such
as at the beach or in a sand box etc.
•
To prevent unintentional opening of the card/
battery door and terminal cover, it is
recommended to use the supplied silicon jacket
(P18)
.
N
:
Red area
O
: [LOCK] switch (gray part)
P
: Released state
Q
: Locked state
