Preparation
- 24 -
Inserting and Removing the Card (optional)/the
Battery
•
Check that this unit is turned off.
•
Confirm that there is no foreign object.
(P8)
•
We recommend using a Panasonic card.
1
:Slide the [LOCK] switch
B
, and
release the lock.
2
:Slide the release lever
A
and open the
card/battery door.
•
Always use genuine Panasonic batteries.
•
If you use other batteries, we cannot guarantee
the quality of this product.
Battery: Insert until it is locked by the
lever
C
being careful about the direction
you insert it. Pull the lever
C
in the
direction of the arrow to remove the
battery.
Card: Push it fully until it clicks being
careful about the direction you insert it.
To remove the card, push the card until it
clicks, then pull the card out upright.
D
: Do not touch the connection terminals of the
card.
•
The card may be damaged if it is not fully inserted.
Close the card/battery door until it clicks,
and then lock the [LOCK] switch by
sliding it toward [
2
].
•
If the card/battery door cannot be completely
closed, remove the card, check its direction and
then insert it again.
•
Confirm that the red part on the
release lever
is not
showing.
