Advanced (Recording pictures)
- 80 -
This takes pictures of a baby with a healthy complexion. When you use the flash, the light
from it is weaker than usual.
It is possible to set different birthdays and names for [BABY1] and [BABY2]. You can
select to have these appear at the time of playback, or have them stamped on the
recorded image using [TEXT STAMP]
(P140)
.
∫
Birthday/Name setting
1
Press
3
/
4
to select [AGE] or [NAME] and then press
1
.
2
Press
3
/
4
to select [SET] and then press [MENU/SET].
3
Enter the birthday or name.
•
When the birthday or name is set, [AGE] or [NAME] is automatically set to [ON].
•
If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
4
Press [MENU/SET] to finish.
∫
To cancel [AGE] and [NAME]
Select the [OFF] setting in step
2
of the “Birthday/Name setting” procedure.
Note
•
During motion picture recording, settings for [PORTRAIT] are used.
•
The age and name can be printed out using the “PHOTOfunSTUDIO 5.0 HD Edition” bundled
software on the CD-ROM (supplied).
•
If [AGE] or [NAME] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed. Before taking pictures, set [AGE] or [NAME] to [ON].
•
The focus range is 5 cm (0.17 feet) (Wide)/30 cm (0.99 feet) (Tele) to
¶
.
•
When the camera is set to [STABILIZER] and there is very little jitter, or if [STABILIZER] is set
to [OFF], shutter speed may slow down up to 1 second.
•
[INTELLIGENT ISO] is activated, and maximum ISO sensitivity level becomes [ISO1600].
•
If the camera is turned on with [BABY1]/[BABY2] set, the age and name are displayed at the
lower left of the screen for about 5 seconds, along with the current date and time.
•
If the age is not properly displayed, check the clock and birthday settings.
•
The birthday setting and name setting can be reset with [RESET].
•
The initial setting for [AF MODE] is [
š
].
•
LED light is fixed to [
].
[BABY1]/[BABY2]
Birthday:
2
/
1
: Select the items (year/month/day).
3
/
4
: Setting.
[MENU/SET]: Exit.
Name:
For details on how to enter characters, refer to
“Entering Text” on
P128
.
