11
•
Step 5. Set the INITIAL SETTING: (Refer to “CAUTION 1”)
[Caution for before settings]
Once "NONE(JAPAN)" (Area for Japan) or "P" (Area for North America) is selected with "INITIAL SETTINGS", other areas
will not displayed even if "INITIAL SETTINGS" menu is displayed again, thus, the area can not be changed.
Select the area carefully.
Select the area with pressing “[ UP ] / [ DOWN ] of Cross key”, and then press the “[ RIGHT ] of Cross key”.
The only set area is displayed, and then press the “[ RIGHT ] of Cross key” after confirmation.
(The unit is powered off automatically.)
Confirm the display of “PLEASE SET THE CLOCK” in English when the unit is turned on again.
•
Step 6. CONFIRMATION:
The display shows “PLEASE SET THE CLOCK” when turn the Power on again.
When the unit is connected to PC with USB cable, it is detected as removable media.
(When the “GT” or “GK” model suffix is selected, the display shows “PLEASE SET THE CLOCK” in Chinese.)
1) As for your reference Default setting condition is given in the following table.
•
Default setting (After “INITIAL SETTINGS”)
MODEL
VIDEO OUTPUT
LANGUAGE
DATE
REMARKS
a) DMC-TZ3S
NTSC
Japanese
Year/Month/Date
b) DMC-TZ3, TZ2P/PC/PL
NTSC
English
Month/Date/Year
c) DMC-TZ3EB/EG/EGM/GC/GN/SG
DMC-TZ2EB/EG/EGM/GC/GN
PAL
English
Date/Month/Year
d) DMC-TZ3, TZ2EF
PAL
French
Date/Month/Year
e) DMC-TZ3, TZ2EE
PAL
Russian
Date/Month/Year
f) DMC-TZ3, TZ2GK
PAL
Chinese (simplified)
Year/Month/Date
g) DMC-TZ3, TZ2GT
NTSC
Chinese (traditional)
Year/Month/Date
h) DMC-TZ3, TZ2GD
NTSC
Korean
Year/Month/Date
Summary of Contents for Lumix DMC-TZ2P
