17
VQT2A10
∫
Notes
≥
Check one more time that the O-ring is fitted evenly into the O-ring groove.
≥
Avoid opening or closing the Case where there is a lot of sand or dust and in humid
or wet places.
≥
If there is a sudden change in temperature, condensation may appear inside the
Case.
≥
If sunscreen or sun oil sticks to the Case, wash it off immediately with lukewarm
water to prevent reduced waterproofness or discoloration.
∫
Please use the supplied Anti-reflective lens barrel cover that protects
light from shining into pictures.
If the marine case is used for recording, then light may shine into pictures. If this is the
case, it is recommended to attach this Anti-reflective lens barrel cover to your digital
camera.
Attaching this Anti-reflective lens barrel cover around the digital camera’s lens will
reduce the incidence of light reflection in pictures.
1
Remove the sheet
2
from the adhesive part of the Anti-reflective
lens barrel cover
1
.
Securely adhere the Anti-reflective lens barrel cover
1
to the digital
camera in precise alignment with the lens.
≥
Before adhering it, check that the adhesive parts are free from stains or dust.
≥
After using the marine case, paste the sheet back on the Anti-reflective lens barrel
cover for storage.
≥
If you do not use the marine case, it is not necessary to attach the Anti-reflective
lens barrel cover to the digital camera.
≥
If you lose or damage this Anti-reflective lens barrel cover, please purchase one at
a shop.
VQT2A10.book 17 ページ ２００８年１２月１６日 火曜日 午後３時１１分
