- 14 -
Primary Filter (Washable)
Latch
Dust Cup
Lid
Latch
Washable
Primary Filter
Primary
Filter
The washable primary filter is located
inside the dust cup lid. Check the primary
filter frequently and clean when dirty.
It is recommended to clean the primary
filter with cold water at least every (1)
month.
NOTE:
When the cleaning of the filter no
longer restores vacuum cleaner suction to
full power, replace the filter. See
CONSUMABLE PARTS
(page 5).
➢
Remove dust cup. (See
DUST CUP
,
p. 11).
➢
Pull the dust cup lid latch and open
the lid.
➢
Remove the primary filter.
➢
Wash with cold water only,
DO NOT
use detergent or soap. Squeeze by
hand and allow to air dry. Allow parts
to dry 24 hours before putting back
into vacuum cleaner.
➢
DO NOT
operate without primary filter
installed.
DO NOT
wash in the
dishwasher.
DO NOT
install damp.
To Reinstall:
➢
Place the primary filter into the dust
cup lid.
➢
Close the dust cup lid. Be sure the lid
snaps in place. A noticeable “click”
should be heard.
➢
Reinstall the dust cup. (See
DUST
CUP
, p. 12)
hours
month