background image

C) HOW TO USE YOUR TELESCOPIC HANDLE

-5 -

Telescopic handle may be raised or lowered as desired for
vacuuming or storage.

To raise or lower the telescopic handle to one of four (4) posi-
tions, depress handle height adjust button and position the
handle to the desired setting.

NOTE: You should hear a noticeable “click” sound when
handle reaches the operating position.

Make sure the handle is locked in the operating position
before using the vacuum cleaner. DO NOT operate the
vacuum cleaner unless handle is locked.

NOTE: Always lift the vacuum cleaner by the carrying handle
when transporting to storage.

Cord clip

Handle height

adjust button

Carrying handle

- 16 -

MODEL NO.

MC-UL674

POWER SOURCE

230-240V / 50Hz

MAX. INPUT POWER

2200w

MOTOR PROTECTION

YES

DUST BIN CAPACITY

1.8 litres

EXHAUST FILTER

HEPA

DIMENSIONS (W x L x H)

368x406x1000 mm

NET WEIGHT

11.7 kg

DUSTING BRUSH

YES

PIPE

YES

CREVICE NOZZLE

YES

AIR TURBINE

YES

SPECIFICATIONS

B)  HOW TO  ATTACH THE  HOSE

A

B

B

A

Hose Coupling

Hose Inlet

Aligned hose connector and connector pipe.

Push down to a press fitting.

Connector Pipe

Hose connector

1

2

1

1

To assemble hose coupling:

Depress tab and tab as shown.

Install hose coupling into hose inlet.

Stretch hose and wrap around vacuum cleaner.

Summary of Contents for MC-UL674











Reviews: