29
TEMPERATURE RECORDER (OPTION)
WARNING
Always disconnect the power supply to the unit prior to attachment of a temperature recorder
in
order to prevent electric shock or injury.
Setting of MTR-G85C
Loading the ink pen:
1.
Slightly raise the end of the pen lifter and remove from the lifter
stopper. Then rotate clockwise as shown in Fig. 1.
2.
Remove the ink pen from the bag and remove its cap. The cap
can be conveniently kept on the cap holder located at the upper left
corner.
3.
Press both sides of the pen arm as indicated by the arrows to open
the head clamp at A and B. (See to Fig. 2 illustration 1)
4.
Position the ink pen so that the guide pins fit into the guide holes
on the pen arm. (See to Fig. 2 illustration 2)
5.
Press the two sides of the head clamp as indicated by the arrows
to secure the ink pen. (See to Fig. 2 illustration 3) From the side
view, the ink pen should fit perfectly on the arm. Confirm that the
pen arm is attached to both sides of the ink pen.
6.
After loading the ink pen, return the pen lifter to the original position.
Confirm that the pen lifter has securely entered the pen lifter stopper.
Open cover latch
Key lock
Pen arm
Pen lifter
Ink pen
Chart guides
Back-up battery
Power switch
Chart hub cover
Recording paper
Pilot lamp
Zero adjustment screw
Fast feed button
Paper speed selector
Fig. 1
Fig. 2
Ink pen
Ink pen
Pen arm
1
2
3
