background image

 

44

 

OTHER PARAMETERS

 

 

Each setting 

Brightness(Active):  

Brightness of LCD touch panel of the usual state. Adjust Brightness(Active) slide bar or input set value 
into the Brightness(Active) input box. Settable range: 50

80, factory setting: 80. 

 

Sleep:  

The function is that the rightness of LCD touch panel is lowered to save electricity, when there is no key 
operation during set time. 
By holding the Sleep slide key and sliding it right, the Sleep function is turned to ON. Input the set value 
of time to change the Sleep state. Settable range: 1 minute

5 minutes, factory setting: 2 minutes. 

Note:

 It is not possible to operate any key in the Sleep state. By touching the LCD touch panel, the Sleep 

state is released and the LCD touch panel returns to the usual state. Under this condition, key operations 
are available. 
 

Brightness(Sleep):  

Brightness of LCD touch panel of the Sleep state. Adjust Brightness(Sleep) slide bar or input set value 
into the Brightness(Sleep) input box. Settable range: 0

50, factory setting: 20. 

 

5.

 Press Top key to return to the Top screen.

 

 
 

Summary of Contents for MDF-DC500VX Series

































































Reviews: