background image

39 

 

 

4.

 On the Alarm screen, the newest 7 days’ alarm 

logs (containing that day) are displayed. 

Note:

 When the number of applicable alarm log is 

6 or more, by pressing the top (

) or the bottom 

(

) log, the log table currently displayed scrolls 

and hidden alarm logs can be seen. 
 

Press Back key to return to the Log screen. 

Press Top key to return to the Top screen. 

 
 
5.

 On the Alarm screen, by inputting days into the 

Last XX Days input box, alarm logs for specified 
days (containing that day) are displayed. 
Settable range: 1 day

45 days. 

Note: 

The error of about 1 minute may be 

observed during 1 month. Refer to page 43 for the 
procedure of setting time.

 

 

Press Back key to return to the Log screen. 

Press Top key to return to the Top screen. 

 

On the Alarm screen of procedure 

4

 or 

5

, alarm log data can be exported in CSV format to the USB 

memory inserted into the USB port.

 

6.

 Insert the USB memory into the USB port.

 

Note: 

It is not possible to use a USB memory with security functions that requires entering password.

 

 
7.

 Press Export key. 

 
 
 
 
 
 
 

 
 
 
8.

 When the export is complete, Information dialog 

box is displayed. Press OK key. Refer to page 41 
and 42 for the details about abnormal export or 
exported file name. 
 
 
 
 
 

9.

 Press Top key to return to the Top screen. 

Summary of Contents for MDF- DU900VC Series
































































Reviews: