background image

 21

 

   DISPOSAL OF UNIT 

 
 

(English) 

FOR EU USERS 
The symbol mark and recycling systems described below apply to EU countries and do not apply to 
countries in other areas of the world. 
 
Your product is designed and manufactured with high quality materials and components which can be 
recycled and/or reused. 
 
The symbol mark means that electrical and electronic equipment, batteries and accumulators, at their 
end-of-life, should be disposed of separately from your household waste. 
 
Note:  
If a chemical symbol is printed beneath the symbol mark, this chemical symbol means that the battery or 
accumulator contains a heavy metal at a certain concentration. This will be indicated as follows: Hg: 
mercury, Cd: cadmium, Pb: lead 
 
In the European Union there are separate collection systems for used electrical and electronic equipment, 
batteries and accumulators. 
Please, dispose of them correctly at your local community waste collection/recycling centre. 
 
Please, help us to conserve the environment we live in!   

 
 
(German) 

Für EU-Staaten 
Das Symbol und das erwähnte Wiederverwertungssystem gelten nur für die Länder der EU und nicht für 
andere Länder oder Gebiete in der Welt. 
 
Die Produkte von werden aus hochwertigen Materialien und Komponenten gefertigt, die sich wieder 
verwenden lassen. 
 
Das Symbol bedeutet, dass elektrische oder elektronische Geräte, Batterien und Akkus am Ende ihrer 
Lebensdauer nicht im Haushaltmüll entsorgt werden dürfen. 
 
Hinweis:  
Ein chemisches Zeichen unter dem Symbol bedeutet, dass die Batterie bzw. der Akku Schwermetalle in 
gewissen Konzentrationen enthält. Die Metalle werden wie folgt bezeichnet: Hg: Quecksilber, Cd: 
Kadmium, Pb: Blei 
 
In der Europäischen Union gibt es separate Sammelstellen für elektrische und elektronische Geräte, 
Batterien und Akkus. 
Entsorgen Sie solche Geräte bitte richtig in der kommunalen Sammelstelle bzw. im Recyclingzentrum. 
 
Helfen Sie mit, die Umwelt in der wir leben, zu schützen.   
 
 
 
 
 
 

Summary of Contents for MDF-U731 Series



































Reviews: