32
TEMPERATURE RECORDER (OPTION)
WARNING
Always disconnect the power supply to the unit prior to attachment of a temperature recorder
in
order to prevent electric shock or injury.
A temperature recorder is available for the freezer as an optional component. The type of the
temperature recorder is MTR-G85. Contact our sales representative or agent for the installation of a
temperature recorder.
Setting of MTR-G85
Loading the pen cartridge:
1.
Slightly raise the end of the pen lifter and remove from the pen
lifter stopper. Then rotate clockwise as shown in Fig. 1.
2.
Remove the pen cartridge from the bag and remove its cap. The
cap can be conveniently kept on the cap holder located at the upper
left corner.
3.
Press both sides of the pen arm as indicated by the arrows to open
the head clamp at A and B. (See to Fig. 2 illustration 1)
4.
Position the pen cartridge so that the guide pins fit into the guide
holes on the pen arm. (See to Fig. 2 illustration 2)
5.
Press the two sides of the head clamp as indicated by the arrows
to secure the pen cartridge. (See to Fig. 2 illustration 3) From the
side view, the cartridge should fit perfectly on the arm. Confirm that
the pen arm is attached to both sides of the pen cartridge.
6.
After loading the pen cartridge, return the pen lifter to the original
position. Confirm that the pen lifter has securely entered the pen
lifter stopper.
Latch
Key lock
Pen arm
Pen lifter
Pen cartridges
Chart guides
Back-up battery
Power switch
Chart hub cover
Recording chart
Pilot lamp
Zero adjustment screw
Fast feed button
Chart speed selector
Fig. 1
Fig. 2
Pen cartridge
Pen cartridge
Pen arm
1
2
3
