Basic Operation
9
Making a Call
Before making a call, ensure that the phone is switched on, the signal strength
meter shows network coverage is available in the current area, and the battery
has sufficient charge.
While on a call, the duration will be displayed and auto-reset every 4 hours.
Entering numbers
You need to have the area code and the phone
number before you call.
In idle screen
1. Enter the area code and phone number with
#
–
,
2. The entered number is displayed
3. Press
C
(Send)
Ending a call
When you end a call, the duration of the call will be displayed. If
Max Cost
(see
“Max cost” on page 33) is set, the remaining units will also be displayed.
While on a call
1. Press
D
(Power/End)
2. Duration is displayed
3.
Max Cost
is displayed (when set)
Emergency calls
In an emergency, you can make an emergency call
by dialling the international emergency number 112
which is adopted by most countries. Even when
SIM
is not attached in the phone, this function is available
in most cases (
F
).
In idle screen
1. Enter 112 with
#
–
,
2. Press
C
(Send)
Note:
Making emergency calls without a
SIM
is country or network operator
dependent.
Summary of Contents for MICRO-IMAGECHECKER A200 Series
