－
5
－
－
4
－
CAUTION
Do not subject the brushless
amplifier, motor or shaft to high
impact.
The failure could result
in malfunction.
If trip occurs, remove the causes
of the trip and secure the safety
before restarting.
The failure could result in injuries.
Execute the trial-operations
with the motor fixed and a load
unconnected.
Connect a load to the motor after
the successful trial-operations.
The failure could result
in injuries.
Use the specified voltage on the
product.
The failure could result
in electric shocks, injuries, or fire.
Install a safety device against
idling or locking of gear head, and
leakage of grease.
The failure could result in injuries,
damages, and contaminations.
Do not modify, dismantle or repair
the product.
The failure could result
in electric shocks, injuries, or fire.
Do not block the heat dissipation
hole.
The failure could result
in electric shocks, or fire.
Maintenance and check must be
performed by an expert.
The failure could result
in injuries and electric shock.
Conduct proper installation
according to product weight or
rated output.
The failure could result
in injuries, or damages.
Use the motor and amplifier with
the specified combination.
The failure could result in fire.
Ambient temperature of installed
motor and amplifier should be
under permittable one.
The failure could result in damages.
This product should be treated
as an industrial waste when it is
disposed.
Be sure to turn off power when not
using it for a prolonged time.
The failure could result in injuries
due to unintentional operation.
Safety precautions
Important
Do not frequently turn on and off
the master power source.
The failure could result
in malfunction.
Do not place any obstacle that
blocks ventilation around the
brushless amplifier and the motor.
The failure could result
in burns or fire.
Do not approach to the equipment
after recovery from the power
failure because they may restart
suddenly.
The failure could result in injuries.
Do not hold the cables or motor
shaft when transporting the motor.
The failure could result in injuries.
Do not drive the motor from the
external power.
The failure could result in fire.
Never start and stop the motor by
magnet contactor which is provide
on the main line.
The failure could result in damages.
Arrange the phase sequense of the
motor and wiring of the CS sensor.
The failure could result in injuries,
damages, or malfunction.
Transportation, wiring and
checking must be performed with
power source turned off and after
making sure that there is no risk of
electric shock.
The failure could result
in electric shocks or injuries.
