－
E5
－
－
E4
－
English
Do not hold the motor cable or motor shaft dur-
ing the transportation.
Failure to observe this instruction
could result in injuries.
Be sure to perform transportation and installation
without drops and falls.
Failure to heed these
requirements will result in
personal injury or malfunction.
Do not get on the product.
Do not place heavy object on the product.
Failure to observe this instruction
could result in electrical shocks,
injuries, breakdowns and dam-
ages.
Do not use the equipment under direct sunshine.
Failure to heed these instructions
will cause personal injury or fire.
Do not block the heat dissipating holes or put
the foreign particles into them.
Failure to observe this instruction
could result in electrical shocks
and fire.
Do not give strong impact shock to the Product.
Failure to observe this instruction
could result in breakdowns.
Do not give strong impact shock to the motor
shaft.
Never run or stop the motor with the electro-
magnetic contactor installed in the main power
side.
Do not make an extreme gain adjustment or
change of the drive.
Do not keep the machine running/operating un-
stably.
Failure to observe this instruction
could result in injuries.
Do not approach to the machine since it may
suddenly restart after the power resumption.
Design the machine to secure the safety for the
operator even at a sudden restart.
Never attempt to perform modification, dismantle
or repair.
The failure to heed this instruction
will result in fire, electric shock,
personal injury or malfunction.
Do not turn on and off the main power of the
amplifier repeatedly.
The failure to head this instruction
can cause malfunction.
Make an appropriate mounting of the Product
matching to its wight and output rating.
The failure to heed this instruction
can result in personal injury or
malfunction.
Observe the specified mounting method and
direction.
Do not place any obstacle object which blocks
air passage around the motor, amplifier and
peripheral.
Temperature rise due to poor
ventilation can cause burn injury
or fire.
Adjust the motor and amplifier ambient environ-
mental condition to match the motor operating
temperature and humidity.
Failure to heed these require-
ments will result in personal injury
or malfunction.
Provide the specified space between the
amplifier and inner surface of the control panel
and other devices.
Observe the specified voltage.
Operation from a voltage higher
than the rated voltage will cause
electric shock, personal injury or
fire.
Install a safety device against idling or locking of
gear head, and leakage of grease.
Lack of protection will cause
personal injury, property damage
or pollution.
Use the motor and the amplifier in the specified
combination.
Wrong combination will cause
malfunction or fire during
operation.
Test-run the securely fixed motor without loading
to verify normal operation, and then connect it to
the mechanical system.
Operation with wrong model or
wrong wiring will cause bodily
injury.
If trip occurs, remove the causes of the trip and
secure the safety before restarting.
The failure to head this instruction
will cause bodily injury.
When failure occurs at the amplifier, turn off
power to the amplifier.
Continuous high current flow will
cause fire.
Correctly run and arrange wiring.
Wrong connection will cause
injury or electric shock.
Always keep power disconnected when the
power is not necessary for a long time.
The failure to head this instruction
will cause improper operation
that could result in hazards to
personnel.
Maintenance must be performed by an experi-
enced personnel.
Wrong connection will cause
injury or electric shock.
This Product shall be treated as Industrial Waste when you dispose.
Caution
Safety Precautions
Please observe safety precautions fully.
