GB22
Troubleshooting
Problem
Cause and solution
●
This is normal.
You may hear sound such as squeaking or cracking.
•
These are the sound of ingredients being compressed.
(Depending on the ingredients, the noise may be quite loud.)
•
This is the sound of the rotating brush contacting with juice cone.
Noise during
operation.
The juicer does
not run after the
power is switched
on.
●
Is the mains plug inserted into a household mains socket?
➡
Insert the mains plug into a household mains socket.
●
Set the juicer correctly.
➡
The lid needs to be turned until you hear a “click” sound. If you fail to
do so, the juicer will not run after the power is switched on.
(See P. GB15)
●
The circuit breaker protection is activated.
➡
See “circuit breaker protection”. (See P. GB23)
Remove prohibited ingredients from the juicer.
The motor
housing is
hot.
●
The operating time is longer than the rated duration.
➡
Follow the rated duration (up to 15 minutes).
To resume operation, please wait for at least 30 minutes. This allows the
motor housing to cool down and avoid failure due to overheating of motor.
The juicer
stopped suddenly.
●
The lid or small feed inlet is open.
➡
Switchoffthepower,closethelid,andstartagain.
●
The circuit breaker protection is activated.
➡
See “Circuit breaker protection”. (See P. GB23)
Remove prohibited ingredients from the juicer.
●
Clogging of pulp spout.
➡
Switchoffthepowerandremoveresidueusingthetipofcleaning
brush handle.
The juicing bowl
or motor housing
shakes during
operation.
●
This is normal.
Since the juicing bowl and motor housing are a split type, they may
shake when the squeezing screw is rotating.
Do not press the lid or juicing bowl. (Doing so may result in failure of
the juicer.)
●
The rubber plug is attached loosely.
➡
Attach the rubber plug securely. (See P. GB13)
The juicing bowl
sways during
operation.
Leakage of juice
or frozen dish.
●
Incorrect assembly of the gasket, rubber brushes and/or rubber plug.
➡
Attach them correctly. (See P. GB12-13)
Abnormal noise
or vibration.
●
The squeezing screw, juice attachment or frozen cone are not attached
correctly.
➡
Attach them correctly. (See P. GB12-13)
Summary of Contents for MJ-L700
Page 24: ...Memo ...
Page 25: ......
