IT27
Italiano
Pulizia
Prelavaggio
Il prelavaggio permette una pulizia più semplice. Può essere utilizzato per la Lama da taglio e l’Unità del Frullatore.
Per il prelavaggio, è suffi ciente seguire la seguente procedura.
1
Frullatore
Robot Da Cucina
Inserire l’accessorio usato nella Ciotola, riempire
la Ciotola con acqua fi no a che l’accessorio risulta
sommerso (max 500 mL). Mettere il Coperchio della
Ciotola sopra quest’ultima e ruotare in senso orario fi no
a quando si sente un “clic”.
Per l’Unità Frullatore riempire la caraffa con 500 mL di
acqua e coprire con il coperchio. Inserire la spina nella
presa di corrente e accendere l’Interruttore.
2
3
Robot da cucina: Selezionare la modalità intermittente,
premere l’Interruttore Stop/Avvio e lavorare per 10-20
secondi a livello 10.
Frullatore: Selezionare la modalità Continua, premere
l’Interruttore Stop/Avvio e lavorare per 10 ~ 20 secondi
a livello 10.
Premere l’Interruttore Stop/Avvio per arrestare l’uso.
Spegnere l’Interruttore e staccare la spina dalla presa
di corrente. Rimuovere gli accessori e procedere con la
pulizia.
Lavare gli elementi risciacquandoli sotto l’acqua corrente. Utilizzare un detergente neutro da cucina, se
necessario. Procedere ad asciugarli con un panno pulito.
Lavare gli elementi risciacquandoli sotto l’acqua corrente, e pulire accuratamente con la
Spazzola. Utilizzare un detergente neutro da cucina, se necessario.
Nota:
• Questi elementi sono estremamente taglienti e devono essere maneggiati con cautela durante
la pulizia. Evitare di fare sbattere questi elementi con oggetti duri durante la pulizia.
• La Base del Contenitore per Tritatutto non deve essere lavata, utilizzare la Spazzola per la pulizia.
DOPO L’USO
100_160419_MK-F800_Second_EU(UZ50E153).indb 27
2016/04/19 16:57:21