background image

© 2011 Panasonic Manufacturing Malaysia Berhad
(6100-K). Unauthorized copying and distribution is a
violation of law.

PMMA111136CE

Meat Grinder

Model No.

MK-MG1300WTN
MK-MG1300WTZ
MK-MG1300WTQ

MK-MSG1300WTN (QATAR, ETC)
MK-MSG1300WTZ (UAE, SAUDI, KUWAIT)
MK-MSG1300WTQ (RUSSIA, UKRAINE, ETC)

TABLE OF CONTENTS

PAGE

PAGE

1 PRECAUTIONS (Strictly follow these instruc-

tions.)----------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2
3 Schematic Diagram ---------------------------------------------- 2
4 Basic Wiring Diagram------------------------------------------- 3
5 Disassembly and Assembly Instruction ------------------ 4

5.1. Disassembly of Motor Housing------------------------- 4
5.2. Disassembly of Motor Set & Gear Box--------------- 5
5.3. Disassembly of Switch ----------------------------------- 6
5.4. Disassembly of Switch P.C.B. -------------------------- 7

6 Troubleshooting Guide ----------------------------------------- 8

6.1. SYMPTOM : A.C. motor interupted when

feeding meat (overloaded). ----------------------------- 8

6.2. SYMPTOM : Switch turned on, but A.C. motor

failure to start. ---------------------------------------------- 8

6.3. SYMPTOM : A.C. motor running, but feed

screw failure to turn.--------------------------------------- 8

6.4. SYMPTOM : A.C. motor running too noisy and

meat grinding too slow. ----------------------------------- 8

6.5. SYMPTOM : A.C. motor running noise

unusual. ------------------------------------------------------ 8

6.6. SYMPTOM : Smell of burning from A.C.

motor. --------------------------------------------------------- 8

7 Exploded View and Replacement Parts List ------------- 9

7.1. Exploded View ---------------------------------------------- 9
7.2. Packing ----------------------------------------------------- 10
7.3. Replacement Parts List--------------------------------- 11

Summary of Contents for MK-MG1300WTN














Reviews: