Washing Instructions - 25
After Starting Washing
Required time
Times depend on the programmes and
temperature settings that have been
selected.
Actual times may differ slightly from
-
those shown.
The displayed times include the time
-
needed for the water to fill up and to
drain out, thus they vary depending on
water pressure, drainage and amount of
laundry.
If you change the functions while
-
washing, the displayed times may
change.
If the laundry in the drum needs to be
-
balanced, times will be extended.
Changing settings
After washing has started, the programme,
temperature, and preset time cannot be
changed.
To change the programme or temperature
-
settings, turn the appliance off and then
on again.
To change the rinse or spin settings while
-
washing, press the Pause button once
the appliance is full of water.
You can change the spin speed, Extra
-
Rinse and Easy Ironing function during
the washing process.
No settings can be changed after the
-
washing process has finished.
Unlocking the door
The door automatically locks while in use,
and the symbol is shown while the door
is locked. A click will be heard when the
door locks or unlocks.
Note
While the door is locked, if the
-
appliance is switched off, or if there
is a power interruption, the door
stays locked until the switch is turned
on again.
This is different from the child safety
-
lock. (See page 24.)
Press the Start button to unlock the
door during operation.
After about 1 minute, the drum stops
spinning, and the door will automatically
unlock.
If the door does not open, see page 29.
Caution
If you have to unlock the door
mid-programme, make sure that
water from the drum does not
overflow onto the floor.
Water and soap suds might come out
of the door and the door opening. You
may need a towel to soak them up.
NA-140VX4_English.indb 25
2012-12-28 10:07:29