38
39
39
Installation
Service person only
Moving and Installing
Levelling the appliance
Prepare a No .17 spanner . (sold
separately)
4 adjustable feet
(1)
(2)
(4)
(3)
Lock nut
Adjustable feet
1
2
3
1
Loosen the lock nut with the
spanner .
2
Turn the adjustable foot to adjust
the height .
3
Tighten the lock nut . (A spirit
level is useful for making sure the
appliance is level .)
NOTE
z
Make sure that all lock nuts
are tightened securely and the
adjustable feet are still bolted to the
appliance .
If they are unbolted, the appliance
will shake and move around .
The anchor rods keep the interior of
the appliance in place, and protect it
from vibration during transportation .
Drum
Anchor
rods
NOTE
z
Operating the appliance with
anchor rods still attached will cause
excessive vibration . They must be
removed before operation .
z
Store the anchor rods and brackets .
They will be needed when the
appliance is moved again in the
future .
z
When moving the appliance again,
the anchor rods and brackets must
be attached to the appliance . Attach
the anchor rods in the reverse
order they were removed . If having
diffi culty on positioning the anchor
rods, try the following:
-Insert the anchor rod while turning
it .
-Insert and position two anchor
rods in parallel at the same time .
-Insert the anchor rod while moving
the drum a little .
How to remove
Anchor
rods (2)
1
Remove two screws .
(Rear of appliance)
2
Remove the bracket .
3
Set the bracket to the groove of the
anchor rod, and turn 90 degrees .
4
Pull the anchor rod out .
The rod stops twice during removal .
Pull the rod while turning it .
5
Attach the cover cap to the hole . If
the caps are not attached, foreign
objects may enter the appliance
and cause a malfunction .
Removing the anchor rods
