40
41
41
Installation
Service person only
Connecting the Hoses
Connect the hoses properly to prevent water leaks .
Maximum connection distance of hoses and mains lead
Water supply hose
Mains water pressure and water flow
z
Water pressure: 0 .03-1 .0 MPa
If the water pressure exceeds this
value, fit a pressure reducing valve.
z
Water flow from tap: 5 L/min. or
more
Connecting the water supply hose
CAUTION
z
Do NOT twist, squash, modify or
cut the hose .
z
Tighten the nut firmly.
1
Attach one end of the hose to the
water inlet on the appliance and
tighten by hand .
Water inlet
Water supply
hose
(Rear of appliance)
2
Attach the other end of the hose to
the tap and tighten by hand .
min .
10 mm
3/4"
Hose with water
supply valve
Standard hose
3
Turn on the tap slowly and make
sure there are no leaks .
Drain hose
Draining to a sink or wash basin
CAUTION
Secure the drain hose with an elbow
so that it does not come off by water
pressure during drainage .
Elbow
(supplied)
Draining to a stand pipe
Stand pipe
Draining to a drain hole
NOTE
z
Do not twist, pull out or bend the
drain hose .
z
Do not put the hose tip under water .
Left side connections
Right side connections
Sink
Water supply hose
Water supply hose
Drain hose
Drain hole
145 cm
95 cm
85 cm
p
q
Rise of drain hose
(max . 100 cm)
Drain hole
95 cm
140 cm
40 cm
Sink
p
q
Rise of drain hose
(max . 100 cm)
Drain hose