4
Operation Panel
Auto Restart lamp
In case of a power
failure during
operation, operation
will resume from the
point where it was
stopped when the
power is recovered.
The lamp lights up
when the operation
resumes.
Power On/Off
The power turns
off automatically if
you do not press
“Start”/“Pause”
within 10 minutes
after power-on.
Change water level
During the wash process,
press “Water Level” to
change the water level.
●
Some water levels cannot
be selected depending
on the program.
●
Press “Water Level” to
check the water level.
Water level/
remaining time
Water level/
water amounts
Indicates the selected program (No.)
After starting operation, indicates
the water level according to the
amount of laundry.
Indicates the approximate
remaining time (min).
Water
Level
Water amounts
NA-
F70B7
NA-
F65B7
NA-
F62B7
10
52 L
48 L
46 L
9
48 L
44 L
8
42 L
7
39 L
6
37 L
5
35 L
4
32 L
3
31 L
2
29 L
1
20 L
Program selection (P. 5)
Child Lock lamp (P. 9)
Start/Pause
Reserve
e.g.) 8 hours later
●
Setting range: 2 - 24 hours later,
in one-hour increments.
(3 - 24 hours later for the Soak
program)
●
Not available for the following
programs:
Delicate, Air Dry, Tub Hygiene
Change process settings
Change the combination of wash,
rinse and spin processes, and the
time length or number of times for
individual processes. (P. 9)
Flashing
(in progress)
Lighting
●
After starting operation, you
can change settings only
during wash process by
pressing “Start/Pause”.
