Water supply fi lter
If water does not fl ow smoothly
●
Follow the procedure below to prevent
splashing of water.
1
After turning off both hot and
cold water faucets
Turn the
power on.
2
Select Hot or Warm.
3
Start.
4
After approx. 40 seconds
Turn the power off.
5
Loosen the
nut and
remove the
hose.
6
Remove the filter and remove
dirt on the fi lter.
Water supply fi lter
Main unit, lid
If stained with detergent or softener
Wipe with a soft cloth.
(To prevent damage to resin parts or metal corrosion)
●
For heavy soil, wipe with a neutral kitchen detergent.
●
Do not splash water.
Tub
Once a week <Air Dry>
1
After operation ends
Run the Air Dry program without
loading laundry. (P. 11)
Once a month <Tub Hygiene>
Preparation: Turn on the water faucet.
1
Without loading laundry
Turn the power on.
2
Select the Tub
Hygiene program.
3
Start.
When the tub is filled with water
Pause.
4
Put bleach in the tub.
●
Use chlorine bleach for
clothes.
Approx. 200 ml
5
After closing the lid
Start.
After approx. 2 hours and
a half, tub cleaning ends.
Summary of Contents for NA-F62G6
