12
RESERVE Program (9 hours)
The washing cycle will be
fi
nished approximately 9 hours from the current time (Sometimes the
operation time may exceed the reserve time caused by the water feeding and draining condition).
Programming timer [RESERVE] only can be used with [NORMAL] and [HYPER SPEEDY] course.
1
3
2
1
Press the [POWER ON] button and put in the laundry.
2
Press the [PROGRAM] button four times
for “NORMAL RESERVE” course.
Press the [PROGRAM] button five times
for “HYPER SPEEDY RESERVE” course.
• The “RESERVE” and “NORMAL” light will be indicated.
3
Press the [START/HOLD] button.
• The machine will measure the load size without
water (laundry sensing).
«
• The water level will be indicated automatically.
4
Put in the appropriate amount of
detergent for the water level.
Then close the lid.
7
Add softener. See page 7 for details.
• The water level indication (recommended detergent
amount) will go off 2 minutes after starting the
program, but only indicate the [RESERVE]. So,
check the water level for recommended detergent
amount before the indication goes off.
• Change the Reserve program. Press the [POWER
OFF] button and start from step 1 again.
• Cancel the Reserve program. Press the [POWER
OFF]
button.
• Check the contents of the Reserve program.
Keep pressing [PROGRAM] button.
Washing cycle will be finished after 9 hours.
NA-F70T1P_EN.indd 12
NA-F70T1P_EN.indd 12
10/1/08 5:43:30 PM
10/1/08 5:43:30 PM
