background image

W

ashing Options

9

Wash / Rinse / Spin

Preparation: Turn on the water faucet.

1

After loading laundry

Turn the power on.

2

According to your purpose

Change process 

settings.

 

● Change the water level 

as necessary.

 

● You cannot select rinse 

process alone.

3

After closing the lid

Start.

Operation ends with 

beeps.

SẤY BẰNG GIÓ 90' (Air Dry)

Water is removed from clothes by the air 

blown from the tub rotation.

 

Clothes that can be dried

• 

Material: Synthetic fibre

• 

Weight: 2 k

g

 or less

1

After loading clothes and closing the lid

Turn the power on.

2

Select 

8

 SẤY BẰNG GIÓ 

90’ (Air Dry) program.

3

Start.

After 90 minutes, drying 

ends with beeps.

NOTE

 

● Clothes may not be sufficiently dried 

depending on the amount and type of clothes, 

the temperature, and the installation condition 

of the washing machine.

 

● Since no heater is used for this function, you 

may feel that clothes are cold and half dry.

Contents of Programs

Program

Total time  

(approx.)

Wash

Rinse 

Spin

1

 GIẶT THƯỜNG (Normal)

55 min

11 min

Twice

5 min

2

 GIẶT NHANH (Speedy)

40 min

3 min

Twice

3 min

3

 GIẶT NHẸ (Delicate)

40 min

9 min

Twice

1 min

Baby-care

65 min

11 min

Twice 

7 min

4

 GIẶT NGÂM NƯỚC XẢ (Fragrance)

75 min

11 min

Twice

5 min

5

 CHĂN MÀN (Blanket)

65 min

13 min

Twice

3 min

6

 GIẶT NGÂM (Soak)

85 min

39 min 

1)

Twice

5 min

7

 TIẾT KIỆM NƯỚC (Water Save)

90 min

12 min

4 times

5 min

9

 VỆ SINH LỒNG GIẶT (Tub Hygiene)

140 min 

2)

63 min

Twice

30 min

NOTE

 

Total time is an estimation. 

(When the standard water supply rate is  

15 L / min)

 

● Total time may increase depending on low 

water pressure, bad draining conditions, and 

the amount and type of clothes.

1) This includes soaking time and washing time.

2) Remaining time of 90 minutes or less will be

displayed.

Summary of Contents for NA-F80VG8

















Reviews: