9
Read before use
4. Connect the water supply hose fitting and water
supply hose
Elbow
Nut
Water
pipe
Water supply valve screw
Press the other end of the water supply hose
connected to the washing machine straight
against the cold water faucet, and tighten the nut
clockwise with your hand.
1
Likewise, connect the other end of the water
supply hose to the water supply valve of the
washing machine.
2
Note
For easy path of the water supply
hose, after deciding the position of the
elbow part, lock the nut straighly and
firmly until the end
(Not locking firmly will cause leakage)
When installing the water supply
hose, please keep proper length and
do not over-pull to prevent leakage
■ How to remove the water supply hose
1. Turn off the water faucet.
2. Close the door, turn the power ON, and then
press start to drain the water inside the pipe.
(to prevent the water from scattering)
3. Turn off the power after about 1 minute.
4. Push the fixing rod downward, pull down the lid,
then remove the water supply hose.
■ Do not use [Stain ] when
drying.
As it cannot proceed with cooling and dehumidifying,
and the clothes cannot be dried.
Water supply
hose fitting
Note
Must install a brand new
water supply hose fitting
Water supply hose
(use old parts will cause
leakages.)
Max. 1.1 m
Mín. 0.7 m
●
Turn on the water faucets to check that water leaks from neither the water supply
valves of the washing machine nor the water faucets.
NA-V180HDH(s)_160HDH(s)-English.indb 9
2022/6/10 下午 10:26:55