Panasonic Nanoe EH-ANA3, Manual

21

English

1.  Pull on the catch on the bottom side of the fi lter to 

detach.

Filter

Catch

·

 Remove the dust etc. adhered to the outside of the 

fi lter using a vacuum cleaner. If this does not remove 
the dust, use your fi ngers to push the dust etc. 
through the fi ne mesh on the internal side towards 
the metal mesh on the external side, and scrub 
away carefully with a toothbrush.

·

 Using the toothbrush, carefully scrub away any dust 

etc. from the internal side of the fi lter.

·

 Using a vacuum cleaner or toothbrush, carefully 

remove any dust etc. adhered to the air inlet.
*  Rubbing forcefully with your nails may tear the 
  fi lter, so please use a toothbrush.

2.  As shown in the illustration, press the fi lter onto the 

hair dryer until a click is heard.

1

2

Maintaining the nanoe™ outlet

Maintaining the nanoe™ outlet

If sparks occur inside the nanoe™ outlet, the 
electrodes have become dirty resulting in an abnormal 
discharge. If this happens, clean the inside of the 
nanoe™ outlet as follows.

·

 Clean only after turning off the power and removing 

the power cord from the power outlet.

·

 A needle portion is located deep within the nanoe™ 

outlet. Using a dampened cotton swab, rub this 
portion gently about fi ve times.

·

 A thin cotton swab is recommended. A regular 

cotton swab may work, but its thick head may be 
diffi cult to insert.

·

 Do not use hard objects to clean, or allow hard 

objects to come into contact with, the parts of the 
nanoe™ outlet so as to avoid causing them to 
become deformed, which would affect the discharge 
of nanoe™ and be dangerous.

Gently rub the tip of the needle portion

cotton swab

nanoe™ outlet