12
MAINTENANCE
Cleaning method
Air outlet < about once a month >
Remove any dust using a vacuum cleaner, and
wipe off the dirt with a well wrung-out soft cloth
Do not wipe it with a hard cloth or hardly.
Otherwise, the surface may be damaged.
After the cleaning, dry the body naturally
before starting the product.
Deodorizing filter
When there is dust around the deodorizing
filter, remove the dust with a vacuum
cleaner, etc.
Do not wash the filter with water.
Clean the black side (front side) with
a vacuum cleaner, etc.
HEPA composite filter
< about once every 2 weeks >
Dusting brush nozzle
or gap suction nozzle
Lay with
newspapers,
etc. to avoid
dust messing
floor.
Do not wash the
filter with water.
Please do not apply too much pressure,
otherwise the filter may be damaged.
Maintenance is
unnecessary
for the white
side (back side).
Wipe off any dust and dirt using
a well wrung-out cloth
Do not wipe it with a hard cloth or hardly.
Otherwise, the surface may be damaged.
Wipe the power plug with a dry cloth.
Inlet cover and body
< about once a month >
Dry cotton swab
Wipe the dirt off the lens with a dry
cotton swab
PM2.5 sensor
< about once every 3 months >
Wipe the lens with a dry cotton swab as
shown below.
Wipe the lens periodically.
(The sensor may not function normally
with accumulation of moisture and
smoke from cigarette.)
Do not insert a cotton swab in other parts.
You can use a light in order to see lens
clearly.
Be sure to disconnect the power before
cleaning.